Categories
Join our Newsletter

Aluminum Power Wheelchair & Scooter Carrier - SC500-ALUM

 
 
 
 
 
 
 
 
 
 
 
 
Back to List
 
$349.99
Shipping:
FREE SHIPPING
Qty:
 
 
Facebook Twitter
 


Description
Features
Dimensions
Product Reviews

The SC500-ALUM scooter carrier is an affordable way to transport a power chair, wheelchair, or scooter by using a vehicle hitch receiver! An integrated 59-1/4" long loading ramp guides a powerchair or scooter up to 29-1/2" wide into the carrier and then folds up vertically for transport. When the carrier is not loaded, the loading ramp can be folded flat for rear hatch or tailgate access. The loading ramp is locked vertically by two spring pull pins and features two anti-rattle springs to reduce ramp vibrations during travel. The SC500-ALUM scooter transport carrier also includes an Anti-Tilt bracket to reduce carrier wobble and a 5/8" hitch pin.

Scooters or power wheelchairs weighing up to 500 lbs are secured to (4) 1"D eyelet tie-down points located near each corner of the 46-1/2" x 30-1/4" (usable size) platform. These eyelets are designed for use hook-end tie-down straps and use with the strongest part of the carrier frame for support. It's recommended to use these tie-down points instead of securing straps to the platform rails which may cause the straps to slide or become loose during transport. Be sure to properly secure a power scooter using hook-end tie-downs with the transport carrier eyelets.

Raised-edge 4" wide rungs are spaced 1" apart along the loading ramp and scooter carrier platform. Ramp rungs are designed for high traction with power scooter or wheelchair tires during loading while the platform rungs help eliminate scooter or powerchair shifting from side to side while hauling behind a vehicle. Spaces between the rungs allow water and debris to pass through, reducing build-up on the scooter transport carrier surface.

The power wheelchair and scooter transport carrier, SC500-ALUM, will not rust and weighs only 81 lbs! The carrier platform, frame, rungs, and ramp are constructed from heavy duty aluminum while the underside support tube and brackets are made from heavy duty reinforced steel with a gray powder-coat finish. Some assembly is required and easy to follow instructions are included. Comes with a 1 year warranty!

 

NOT recommended for any tow-behind trailers including 5th wheel trailers & camping trailers due to excessive bouncing of the vehicle's suspension

  • Accommodates most power wheelchairs and scooters
  • Loading ramp folds flat into the carrier for rear hatch or tailgate access
  • Spring pull pins lock the loading ramp in a vertical position
  • (4) 1"D Eyelet tie-down points, great for hook-end straps
  • Anti-Rattle Ramp Springs reduce ramp vibrations during transport
  • Raised-edge 4" wide rungs with 1" spacing
  • Heavy duty 500 lb weight capacity
  • Lightweight, only weighs 81 lbs
  • Includes an anti-tilt locking device to prevent carrier wobble
  • For use with 2" class III or IV trailer hitches
  • Not for use with 1 1/4" hitches
  • Includes 5/8" hitch pin
  • 1 Year Warranty
  • Some assembly is required
  • Instructions file

SC500-ALUM LIMITATIONS

  • Carrying Capacity: Designed to safely hold up to 500 lbs
  • Hitch Weight Limit: 10% GTW - Standard Class III hitches are rated for 500 lbs & Standard Class IV hitches are rated for 1,000 lbs
  • Vehicle Hauling Capacity: Hauling weight may be limited by the vehicle's hitch load capacity
  • Will not work with any 1-1/4" class II or smaller receivers
  • Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
  • Please check with your dealer to find out if your vehicle's carrying capacity
  • NOT recommended for tow-behind trailers including 5th wheel trailers & camping trailers
  • NOT recommended for use with hitch adapters / extensions
  • Maximum scooter or power wheelchair width is 28 1/4" wide

Weight Capacity: 500 lbs.
Useable Size: 46 1/2" long x 30 1/4" wide (Overall 48 1/4"L x 32"W)
Tray Depth: 7 5/8" (5 7/8" usable)
Ramp Dimensions: 59-1/4" long x 28 1/4" wide (Overall 59 1/4" x 29 1/2"W)
Carrier Weight: 81 lbs.
Trailer Hitch:Works With Both Class II or Class III (How Can I Tell?)
Center of Pin Hole to Carrier (5/8): 7 1/4"
Carrier Warranty: 1 Year
Hitch Height:11" - 18"

There are no customer reviews for this product. However, you can be the first person to add a review for this product.

Add Review
Add Review
Name:
Review:
Rating:
 
 
 
 
 
 
 

(Your browser will be redirected back to this page)
0 Items
$0.00