- Mobility Products
- ATV Products
- Motorcycle Products
- UTV Accessories
- Golf Cart Accessories
- Truck Accessories
- Car Accessories
- Hitch Mounted Products
- Aluminum Walk Ramp
- Tie Down Products
- Lawn & Garden Products
- Car Trailer Ramps
- Pet Products
- Storage Covers
- Marine Products
- Skateboard Ramps
- Hunting Products
- Snowmobile Accessories
- Clearance Products
- Discontinued Products
The AMC-600-2 double motorcycle carrier is the ultimate solution for transporting two motocross bikes without the complications of pulling and storing a trailer. Don't waste valuable trail riding time - load your dirt bikes on this double motorcycle rack in less than 5 minutes. The AMC-600-2 aluminum double motorcycle rack mounts in your class III or IV 2" trailer hitch and includes a reverse anti-tilt locking device that pinches the main tube into the trailer hitch to eliminate any rocking motion, creating a rock solid double motorcycle carrier. The 45.5" long x 5-5/8" wide loading ramp stores directly on the motorcycle carrier with two wing nut bolts. This double motorcycle rack has been specifically designed for transporting motocross bikes, enduro bikes, off road dirt bikes, and some scooters with larger wheels (limitations may apply with the 16" gap in rail).
The weight capacity of the hitch tube is 600 lbs and the carrier rail is designed to handle motorcycles up to 400 lbs maximum overall weight (example: 400 lb bike + 200 lb bike). The motorcycle carrier rail is 75" long x 5.5" wide and has a 16" gap where the front wheel drops partially in to stabilize the motorcycle, acting as a wheel chock. Please measure your scooter or kid's motocross bike to make sure the wheel is large enough so it does not drop through the front wheel gap. Click here to view dimensions of the double motorcycle carrier. This motorcycle carrier also includes a 45.5" lightweight aluminum loading ramp for loading your cycle on the carrier and it conveniently attaches on the carrier next to the carrier track for transport. This motorcycle hitch carrier has a carrying capacity of 600 lbs so please check your vehicle's hitch rating as well as the suspension carrying capability of the carrying vehicle. This carrier comes standard to fit in a 2" square class III, IV, or V 2 inch receiver. This aluminum motorcycle carrier works great for pick up trucks, vans, and SUVs.
This double motorcycle carrier is designed for motocross bikes and enduros. It is not for sport bikes, cruisers or street bikes.
- Reverse anti-tilt device keeps the carrier stable
- Lightweight aircraft aluminum construction
- Aluminum construction will never rust
- Easy assembly
- NOT for scooters/mopeds
- Loading ramp features a full width, welded attaching lip with 2/3" hook
- 1 year warranty
- Steel powder coated main hitch tube
- Designed to safely carry 600 lbs (Maximum motorcycle weight 400 lb per carrying rail)
- Includes aluminum ramp that mounts on carrier
- Main hitch tube is 18" long from center of hitch pin to center of 1st ramp & 39" to the 2nd carrier track
- Fits any 2 inch square receiver
-
Instructions
AMC-600-2 Limitations
- Carrier Carrying Capacity: The AMC-600-2 carrier is designed to safely carry 600 lbs
- Hitch Weigh Limit: Most Class III hitches are rated for 500 lbs Most Class IV hitches are rated for 1000 lbs
- Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load
- Will not work with class II or smaller receivers
- Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
- Please check with your dealer to find out if your vehicle's carrying capacity
- NOT recommended for tow-behind trailers including 5th wheel trailers and camping trailers
- NOT for street bikes, cruisers or sport motorcycles
- NOT recommended for use with hitch adapters / extensions
- Hitch pin NOT included
Track Length: 75 inches
Weight Capacity: 600 lbs.
Ramp Length: 45.5 inches
Rung Spacing: 6 3/4"
Track Width: 5.5 inches
Weight: 69 lbs
