Wheel Stands - Race Ramps - RR-WS-14

This wheel block from Race Ramps is a durable wheel stand that can be used to display your vehicle or as a platform to be used with a scale and turntable. The wheel stands are made of a polystyrene material that is light weight, durable and will not scratch or dent the surface they are on or your vehicle. To add more stability to these wheel blocks the base of the platform is 18" square and the top of the platform is a 16" square. Thanks to the design of the wheel block and the light weight material it weighs only 12.5 lbs and has a weight capacity of 1,500 lbs per block. This wheel stand also is textured to provide a slip resistant surface for your tires or scale. The Race Ramps wheel stands are made in the USA and come with a 1 year manufacturer warranty.

Ramp Safety Warning & Usage Guidelines

• Before using the ramps ensure other persons are clear of the vehicle and the ramps
• Ensure that the ramps are free from damage or corrosion before use.
• Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
• Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
• Carefully drive the vehicle onto the automotive ramps until it is in the correct position
• Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
• Before starting work, walk around the vehicle ensuring it is securely positioned
• Always use jack stand if a person will be going under the vehicle
• On completion of the work, check the parking brake is still firmly on and remove the chocks
• It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
• Exercise caution when using these car ramps with a trailer or three wheeled vehicle